Choose the right barn rake for the cleanup job.
A barn rake finishes the work a fork starts. Use this guide to match the head, handle, and tool combination to bedding edges, aisles, loose hay, arena borders, and daily cleanup.
KD-133 Rake Head
A replacement head for keeping a familiar barn or arena rake setup working.
Heads and handles
Replace the worn component instead of discarding an otherwise useful tool.
Pair with a stall fork
Lift manure and wet bedding first; rake the remaining loose material into a clean finish.
Fast answer
Use a stall fork for lifting and separating bedding. Use a rake for gathering light debris, straightening edges, and finishing aisles. Most barns work faster with both tools stored together.
Choose by surface and material
Stall bedding
Use the fork for the heavy pass, then rake loose shavings away from walls and into the bed.
Barn aisles
A rake gathers hay, bedding, and light debris without turning every cleanup into a full sweeping job.
Arena edges
Choose a comfortable handle length and a head suited to pulling loose footing from rails and corners.
What matters before you buy
- Working width: wider heads cover open aisles faster; compact tools are easier around doors and tight corners.
- Handle fit: the right length helps you keep a neutral posture instead of reaching or hunching.
- Replaceable parts: a replaceable head or handle can extend the useful life of the setup.
- Storage: hang tools off the floor where they stay visible, dry, and less likely to become a trip hazard.
A simple cleanup sequence
- Remove large manure and wet bedding with a stall fork.
- Pull loose bedding from walls, mats, and corners with the rake.
- Level the remaining bed or gather aisle debris for removal.
- Check the head-to-handle connection before returning the tool to storage.
Common questions
Do I need both a stall fork and a barn rake?
Usually, yes. The fork lifts and separates heavier material; the rake gathers light debris and finishes edges and aisles.
When should I replace a rake head?
Replace the head when damaged teeth or a loose connection reduce control or make the tool inefficient. Inspect the handle and hardware at the same time.
How should barn rakes be stored?
Hang them in a dry, visible tool area with the working end off the floor and away from horse traffic.